隨著技術的飛速發展，塑料托盤應用于各個行業，那么塑料托盤的生產過程是怎樣的呢?
托盤廠家小編和你一起來看看吧。
With the rapid development of technology, plastic pallets are used in various industries. What's the production process of plastic pallets? Let's have a look at them with you.
1. 注塑
1. injection molding
塑料托盤有4種成型,成型方法生產的塑料托盤質量更平整,外觀光潔,嚴格,產品設計更為寬松,可分為雙面塑料托盤的積分模型和集合類型的塑料托盤。
There are four kinds of plastic pallets. The quality of plastic pallets produced by the molding method is more flat, the appearance is bright and clean, and the product design is more loose. The plastic pallets can be divided into integral models of double-sided plastic pallets and aggregate type plastic pallets.
2. 擠壓成形方法
2. Extrusion forming method
塑料托盤在擠出中空吹塑成型和一般的成型方法是相似的，由于其產品較大且為雙面型，需要較大的機型，國內機械制造廠家已經研制出高速生產的機型。
The hollow blow molding of plastic pallet is similar to the general molding method. Because its products are large and double-sided, large models are needed. Domestic machinery manufacturers have developed high-speed production models.
3.真空吸塑成型方法
3. Vacuum molding method
吸塑成型真空吸塑托盤分為一面和兩面，一面附小電機和電線，用于包裝、運輸，發展較快，用途較廣。
The vacuum plastic tray is divided into one side and two sides, with small motor and wire attached on one side. It is used for packaging and transportation, with rapid development and wide use.
以上是關于托盤廠家生產塑料托盤的一些成型方法，了解以上內容，可以幫助我們加深對其的了解。
The above is about some molding methods of plastic pallets produced by pallet manufacturers. Understanding the above content can help us deepen our understanding of them.
歡迎進入山東國泰民灃包裝科技有限公司網站,專注紙托盤,瓦楞紙箱,蔬菜包裝,重型紙箱包裝制作廠家,實惠!
