塑料托盤做為倉儲物流行業不可或缺的一份子，發揮著重大的作用。塑料托盤按照正確運用規范運用的話，不但能夠充分發揮其自身的作用外，還能夠延伸其運用壽命，下降塑料托盤的采購本錢。
As an indispensable part of warehousing and logistics industry, plastic pallet plays an important role. If the plastic pallet is used according to the correct application specification, it can not only give full play to its own role, but also extend its service life and reduce the purchasing cost of plastic pallet.
塑料托盤運用時應留意一下幾點：
The following points should be paid attention to when using plastic pallet:
1.應輕放塑料托盤，防止落地時受力不均，發生損壞。
1. The plastic tray should be placed gently to prevent uneven force and damage when landing.
2.放置貨品時，應均勻放置，防止起升轉移時，發生側歪。
2. When placing the goods, they should be evenly placed to prevent the occurrence of sidesway during lifting and transferring.
3.運用轉移設備時，應考慮貨差尺度是否合適此塑料托盤運用，防止尺度不合適，撐壞塑料托盤。
3. When using the transfer equipment, it is necessary to consider whether the size of the goods difference is suitable for the use of the plastic pallet, so as to prevent the plastic pallet from being damaged due to the improper scale.
4.堆垛運用時，應考慮更下面一塊托盤的承重
4. When stacking, the load bearing of the bottom pallet should be considered
標準托盤
Standard pallet
正確的運用塑料托盤應該做到包裝組合碼放在塑料托盤上加上適當?shù)睦υ凸阌诶脵C械裝卸和運送，從而滿意裝卸、運送和存儲的要求。
The correct use of plastic pallets should be made to pack and stack on the plastic pallets with appropriate bundling and wrapping, so as to facilitate mechanical loading and unloading and transportation, so as to meet the requirements of loading and unloading, transportation and storage.
1. 塑料托盤應防止遭受陽光暴曬，避免引起老化，縮短運用壽命。
1. The plastic tray should be protected from sunlight exposure to avoid aging and shorten the service life.
2. 禁止將貨品從高處拋擲在塑料托盤內。合理確認貨品在托盤內的堆積方式。貨品均勻置放，不要會集堆積，偏心堆積。承載重物的托盤應放在平整的地上或物體表面上。
2. It is forbidden to throw the goods in the plastic tray from a height. Reasonably confirm the stacking mode of goods in the pallet. The goods should be placed evenly. Do not gather and pile up. Pallets carrying heavy objects should be placed on the flat ground or on the surface of objects.
3.禁止將塑料托盤從高處拋落，防止因猛烈地碰擊而形成托盤破碎、裂紋。
3. It is forbidden to throw the plastic tray from high place to prevent the tray from breaking and cracking due to violent impact.
4.叉車或手動液壓車作業時，叉刺盡量向托盤叉孔外側靠足，叉刺應悉數伸進托盤內，平穩抬起托盤后才可變換角度。叉刺不可碰擊托盤旁邊面避免形成托盤破碎、裂紋。
4. When forklift truck or manual hydraulic truck is working, the fork thorn shall lean to the outside of the fork hole of the tray as far as possible, and all the fork thorn shall be extended into the tray, and the angle can be changed after the tray is lifted stably. Fork thorn can not hit the side of the tray, to avoid the formation of tray breakage, cracks.
5.標準托盤上貨架時，有必要選用貨架型托盤，承載量根據貨架結構而定，禁止超載運用。
5. When the standard pallet is put on the shelf, it is necessary to select the shelf type pallet, and the bearing capacity is determined according to the shelf structure, and overloading is prohibited.
This paper is supported by pallet manufacturers. For more details, please click our website http://www.daqinchuanmei.cn We will provide you with satisfactory service wholeheartedly.
歡迎進入山東國泰民灃包裝科技有限公司網站,專注紙托盤,瓦楞紙箱,蔬菜包裝,重型紙箱包裝制作廠家,實惠!
